With the failing economy and the falling wages of worker, perhaps the solution to giving your car a different look will be to give your car a complete new paint job. If the mechanics and the engine of the car is in good shape, but you do not fancy the car body, then painting it will be the ideal answer.
Its a fantastic money saver, but even more so if you do it yourself as opposed to having it professionally done up in the workshop. You can do it right if you study the basics and follow the instructions for car spray painting. It's important though if you decide you are going to take on this project that you are ready to see it complete till the end.
The supplies you need are :
-coverings to protect the unpainted regions and masking tape to hold these at the proper place -a good car wash soap and brush and also a wax/grease remover. -a few grits of sandpaper -primers and paint that is urethane base for the car spray painting -paint sprayer -safety equipment such as masks, goggles and protective clothing -knife and putty for fill-ins.
One : You must be sure that you wash the car thoroughly to remove every grime and debris. If you don't then these things will be set in with your paint, leaving a genuinely frustrating look to the completed job. Follow up with a wax/grease remover so the paint you utilise for the car spray painting would adhere properly.
Two : Remove whatever rough spots by sanding. Once this has been done be certain to rinse off any of the loose sandings. This's where you will want to use the putty to fill in any small pit marks, that're have been caused from stones for illustration.
Three : Dont get in too much of a hurry to start your car spray painting. The car must be wholly dry so it is best to leave it to do so for a couple of hours. You can go ahead and cover whatever of the areas that your do not want to get paint on.
Four : At present youre ready to set out with the primer. Don't skip this step, as it'll give a much better look to the finished project. It helps the paint to adhere properly and allows for a more even finish. Next, once the primer is dry you'll need to lightly sand it down.
Five : Youre eventually at the step youve been waiting for. Its time to apply the color for your car spray painting. Whether you've selected to use aerosol paints or a spray gun, the premise remains the same. Merely apply thin coats. A couple would likely be needed. A Couple light coats are much better than one thick coat. You'll be able to tell just by looking at the car how many more coats of paint it would need. Various would only require two whereas others will require three or 4.
6 : In conclusion, down to the last step and that's applying the clear coat. This's done exactly the same as the colored coats.
Now you can have a look at your personalized car spraying.
Its a fantastic money saver, but even more so if you do it yourself as opposed to having it professionally done up in the workshop. You can do it right if you study the basics and follow the instructions for car spray painting. It's important though if you decide you are going to take on this project that you are ready to see it complete till the end.
The supplies you need are :
-coverings to protect the unpainted regions and masking tape to hold these at the proper place -a good car wash soap and brush and also a wax/grease remover. -a few grits of sandpaper -primers and paint that is urethane base for the car spray painting -paint sprayer -safety equipment such as masks, goggles and protective clothing -knife and putty for fill-ins.
One : You must be sure that you wash the car thoroughly to remove every grime and debris. If you don't then these things will be set in with your paint, leaving a genuinely frustrating look to the completed job. Follow up with a wax/grease remover so the paint you utilise for the car spray painting would adhere properly.
Two : Remove whatever rough spots by sanding. Once this has been done be certain to rinse off any of the loose sandings. This's where you will want to use the putty to fill in any small pit marks, that're have been caused from stones for illustration.
Three : Dont get in too much of a hurry to start your car spray painting. The car must be wholly dry so it is best to leave it to do so for a couple of hours. You can go ahead and cover whatever of the areas that your do not want to get paint on.
Four : At present youre ready to set out with the primer. Don't skip this step, as it'll give a much better look to the finished project. It helps the paint to adhere properly and allows for a more even finish. Next, once the primer is dry you'll need to lightly sand it down.
Five : Youre eventually at the step youve been waiting for. Its time to apply the color for your car spray painting. Whether you've selected to use aerosol paints or a spray gun, the premise remains the same. Merely apply thin coats. A couple would likely be needed. A Couple light coats are much better than one thick coat. You'll be able to tell just by looking at the car how many more coats of paint it would need. Various would only require two whereas others will require three or 4.
6 : In conclusion, down to the last step and that's applying the clear coat. This's done exactly the same as the colored coats.
Now you can have a look at your personalized car spraying.
About the Author:
Warning! Don't start a spray paint job until you've seen this. Click this - auto spray paint. Learn to do car respray and spray paint techniques workshops do not want you to know!
0 comments:
Post a Comment